Linux version 2.6.5-1.358 (bhcompile@bugs.build.redhat.com) (gcc version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #1 Sat May 8 09:04:50 EDT 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000ff70000 (usable) BIOS-e820: 000000000ff70000 - 000000000ff7a000 (ACPI data) BIOS-e820: 000000000ff7a000 - 000000000ff7c000 (ACPI NVS) BIOS-e820: 000000000ff7c000 - 0000000010000000 (reserved) BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 255MB LOWMEM available. zapping low mappings. On node 0 totalpages: 65392 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 61296 pages, LIFO batch:14 HighMem zone: 0 pages, LIFO batch:1 DMI present. IBM machine detected. Enabling interrupts during APM calls. IBM machine detected. Disabling SMBus accesses. ACPI: RSDP (v002 IBM ) @ 0x000f73b0 ACPI: XSDT (v001 IBM TP-1D 0x00001290 LTP 0x00000000) @ 0x0ff705d3 ACPI: FADT (v001 IBM TP-1D 0x00001290 IBM 0x00000001) @ 0x0ff70617 ACPI: SSDT (v001 IBM TP-1D 0x00001290 MSFT 0x0100000d) @ 0x0ff706cb ACPI: ECDT (v001 IBM TP-1D 0x00001290 IBM 0x00000001) @ 0x0ff79f87 ACPI: BOOT (v001 IBM TP-1D 0x00001290 LTP 0x00000001) @ 0x0ff79fd8 ACPI: DSDT (v001 IBM TP-1D 0x00001290 MSFT 0x0100000d) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 Built 1 zonelists Kernel command line: ro root=LABEL=/ rhgb quiet mapped 4G/4G trampoline to ffff3000. Initializing CPU#0 CPU 0 irqstacks, hard=02345000 soft=02344000 PID hash table entries: 1024 (order 10: 8192 bytes) Detected 732.773 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Memory: 255940k/261568k available (1540k kernel code, 4912k reserved, 599k data, 144k init, 0k highmem) Calibrating delay loop... 1454.08 BogoMIPS Security Scaffold v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode There is already a security framework initialized, register_security failed. Failure registering capabilities with the kernel selinux_register_security: Registering secondary module capability Capability LSM initialized Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K CPU: After all inits, caps: 0383f1ff 00000000 00000000 00000040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel(R) Pentium(R) III Mobile CPU 1133MHz stepping 01 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfd8fe, last bus=8 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040326 ACPI: IRQ9 SCI: Edge set to Level Trigger. ACPI: Found ECDT ACPI: Could not use ECDT ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__._INI] (Node 11eb5a9c), AE_NOT_EXIST ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 9 10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 9 10 *11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 9 10 11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 9 10 11) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 9 10 11) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Embedded Controller [EC] (gpe 28) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay usbcore: registered new driver usbfs usbcore: registered new driver hub ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' Simple Boot Flag at 0x35 set to 0x1 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1088958306.4294965983:0): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Processor [CPU] (supports C1 C2 C3, 8 throttling states) ACPI: Thermal Zone [THM0] (48 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel 830M Chipset. agpgart: Maximum main memory to use for agp memory: 203M agpgart: AGP aperture is 256M @ 0xd0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize divert: not allocating divert_blk for non-ethernet device lo Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH3M: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ICH3M: chipset revision 2 ICH3M: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:pio, hdd:pio hda: IC25N030ATCS04-0, ATA DISK drive Using cfq io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 128KiB hda: 58605120 sectors (30005 MB) w/1768KiB Cache, CHS=62016/15/63, UDMA(100) hda: hda1 hda2 hda3 hda4 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 input: PS/2 Generic Mouse on isa0060/serio1 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI: (supports S0 S3 S4 S5) checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 187k freed md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: hda1: orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 65242 ext3_orphan_cleanup: deleting unreferenced inode 1271553 ext3_orphan_cleanup: deleting unreferenced inode 1271548 EXT3-fs: hda1: 3 orphan inodes deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 144k freed SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks NET: Registered protocol family 10 Disabled Privacy Extensions on device 022db720(lo) IPv6 over IPv4 tunneling driver divert: not allocating divert_blk for non-ethernet device sit0 ACPI: AC Adapter [AC] (off-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Sleep Button (CM) [SLPB] USB Universal Host Controller Interface driver v2.2 uhci_hcd 0000:00:1d.0: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: irq 11, io base 00001800 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: irq 11, io base 00001820 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: irq 11, io base 00001840 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected EXT3 FS on hda1, internal journal device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com Adding 718192k swap on /dev/hda3. Priority:-1 extents:1 kjournald starting. Commit interval 5 seconds EXT3 FS on hda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. SCSI subsystem initialized inserting floppy driver for 2.6.5-1.358 Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found e100: Intel(R) PRO/100 Network Driver, 3.0.17 e100: Copyright(c) 1999-2004 Intel Corporation divert: allocating divert_blk for eth0 e100: eth0: e100_probe: addr 0xc0200000, irq 11, MAC divert: freeing divert_blk for eth0 ip_tables: (C) 2000-2002 Netfilter core team e100: Intel(R) PRO/100 Network Driver, 3.0.17 e100: Copyright(c) 1999-2004 Intel Corporation divert: allocating divert_blk for eth0 e100: eth0: e100_probe: addr 0xc0200000, irq 11, MAC orinoco.c 0.13e (David Gibson and others) Linux Kernel Card Services options: [pci] [cardbus] [pm] orinoco_cs.c 0.13e (David Gibson and others) Yenta: CardBus bridge found at 0000:02:03.0 [1014:0185] Yenta: ISA IRQ mask 0x0498, PCI irq 11 Socket status: 30000410 Yenta: CardBus bridge found at 0000:02:03.1 [1014:0185] Yenta: ISA IRQ mask 0x0498, PCI irq 5 Socket status: 30000006 cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x170-0x177 0x370-0x377 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. cs: memory probe 0xa0000000-0xa0ffffff: clean. divert: allocating divert_blk for eth1 eth1: Station identity eth1: Looks like a Lucent/Agere firmware version 7.28 eth1: Ad-hoc demo mode supported eth1: IEEE standard IBSS ad-hoc mode supported eth1: WEP supported, 104-bit key eth1: MAC address eth1: Station name "HERMES I" eth1: ready eth1: index 0x01: Vcc 5.0, irq 3, io 0x0100-0x013f ip_tables: (C) 2000-2002 Netfilter core team eth1: New link status: Disconnected (0002) ip_tables: (C) 2000-2002 Netfilter core team eth1: New link status: Connected (0001) eth0: no IPv6 routers present NET: Registered protocol family 23 lp: driver loaded but no devices found eth1: no IPv6 routers present [drm] Initialized radeon 1.9.0 20020828 on minor 0 agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode PCI: Enabling device 0000:00:1f.5 (0000 -> 0001) PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 49555 usecs intel8x0: clocking to 48000