static void radeon_rom_legacy_lcdtable(unsigned char *bios, int hdr)
{
        int offset, i, type_info, extended_offset;
        unsigned int setup;
        char stmp[30];

        offset = BIOS16(hdr + 0x40);
        if (offset == 0) {
                printf("No LCD info table\n");
                return;
        }
        printf("lcd panel id: %d\n", BIOS8(offset));
        for (i = 0; i < 24; i++)
            stmp[i] = BIOS8(offset+i+1);
        stmp[24] = 0;
        printf("lcd panel id string: %s\n", stmp);
        printf("lcd panel x: %d\n", BIOS16(offset+0x19));
        printf("lcd panel y: %d\n", BIOS16(offset+0x1b));

        type_info = BIOS16(offset+0x1d);
        if (type_info & 0x1)
            printf("color ");
        else
            printf("mono ");

        if (type_info & 0x2)
            printf("single ");
        else
            printf("dual ");

        switch ((type_info & 0xfc) >> 2) {
        case 0:
            printf("STN\n");
            break;
        case 1:
        default:
            printf("TFT\n");
            break;
        case 2:
            printf("active addressed STN\n");
            break;
        case 3:
            printf("EL\n");
            break;
        case 4:
            printf("Plasma\n");
            break;
        }

        printf("lcd panel power delay: %d\n", BIOS16(offset+0x24));

        extended_offset = BIOS16(offset+0x26);
        if (extended_offset) {
            printf("lcd panel extended info offset: %d\n", extended_offset);
            printf("lcd extended info rev: %d\n", BIOS8(extended_offset));
        }

        printf("lcd panel vcc delay: %d\n", BIOS16(offset+0x2c));
        printf("lcd panel ref div: %d\n", BIOS16(offset+0x2e));
        printf("lcd panel post div: %d\n", BIOS8(offset+0x30));
        printf("lcd panel fb div: %d\n", BIOS16(offset+0x31));
        printf("lcd panel DIGON to LVDS active: %d\n", BIOS8(offset+0x38) & 0xf);
        printf("lcd panel LVDS active to BLON: %d\n", (BIOS8(offset+0x38) >> 4) & 0xf);
        setup = BIOS32(offset+0x39);
        printf("lcd panel LVDS setup: 0x%x\n", setup);

        if (setup & 0x1)
            printf("888 RGB\n");
        else
            printf("666 RGB\n");

        switch ((setup >> 8) & 0x8) {
        case 0:
            printf("no frame modulation\n");
            break;
        case 1:
            printf("2 levels of grey\n");
            break;
        case 2:
            printf("4 levels of grey\n");
            break;
        default:
            printf("STN panel\n");
            break;
        }

        if ((setup >> 16) & 0x1)
            printf("frame pulse high\n");
        else
            printf("frame pulse low\n");

        if ((setup >> 17) & 0x1)
            printf("line pulse high\n");
        else
            printf("line pulse low\n");

        if ((setup >> 18) & 0x1)
            printf("MOD high\n");
        else
            printf("MOD low\n");

        if ((setup >> 23) & 0x1)
            printf("backlight mod 29 Mhz\n");
        else
            printf("backlight mod 29 Mhz / 3\n");
}